Density-based freight class means the class of a shipment comes from its density: the weight of the handling unit divided by the cubic feet it occupies. For NMFC items classed by density, the standard scale since 19 July 2025 has 13 bands, from class 400 below 1 pound per cubic foot to class 50 at 50 pounds per cubic foot or more (NMFTA Disposition Bulletin 1371, Docket 2025-1 (21 March 2025)). Not every commodity works this way: items with handling, stowability or liability concerns are not fully density-based (NMFTA, NMFC Classification FAQs (updated 7 April 2026)).
Why does density decide freight class?
The NMFC rates commodities on four transportation characteristics: density, handling, stowability and liability (NMFTA, What factors determine NMFC codes? (updated 16 March 2026)). Denser freight that is easy to handle and stow generally gets a lower class, and less dense, harder-to-handle freight a higher one (NMFTA, What is a freight class? (updated 16 March 2026)). A trailer fills up by space as well as by weight, so freight that takes a lot of space for its weight costs more to move.
Since Docket 2025-1, density is the primary factor for many more commodities, because many commodity-specific items were folded into broader density-based items (Bulletin 1371; NMFTA FAQs).
How is density calculated?
Multiply the greatest straight-line length, width and height of the handling unit in inches, including all projections, as tendered. Divide by 1,728 to get cubic feet, then divide the weight of the handling unit by the cubic feet (NMFTA, Calculating Density Best Practices (updated 21 October 2026)).
Example: a pallet measuring 48 x 40 x 48 inches and weighing 800 pounds. 48 × 40 × 48 = 92,160 cubic inches, or 53.33 cubic feet. 800 ÷ 53.33 = 15.0 pounds per cubic foot.
That pallet sits exactly on a breakpoint. At 15.0 it is class 70; measured one inch taller, at 49 inches, its density would be about 14.7 and the class would be 85. Small measuring differences matter most near a breakpoint.
What is the NMFC density scale?
For NMFC items that are classed by density, the standard scale is the 13-subprovision scale adopted in Docket 2025-1 and in effect since 19 July 2025 (Bulletin 1371). It replaced the earlier 11-subprovision scale, whose top step put everything at 30 pounds per cubic foot or more in class 60; classes 55 and 50 were added above it (NMFTA FAQ on the 13-subprovision scale (updated 7 April 2026)). Not every commodity uses this scale: items with handling, stowability or liability concerns are not fully density-based, so the NMFC item for your commodity decides which classes apply (NMFTA FAQs).
| Sub | Density (pounds per cubic foot) | Class |
|---|---|---|
| 1 | Less than 1 | 400 |
| 2 | 1 but less than 2 | 300 |
| 3 | 2 but less than 4 | 250 |
| 4 | 4 but less than 6 | 175 |
| 5 | 6 but less than 8 | 125 |
| 6 | 8 but less than 10 | 100 |
| 7 | 10 but less than 12 | 92.5 |
| 8 | 12 but less than 15 | 85 |
| 9 | 15 but less than 22.5 | 70 |
| 10 | 22.5 but less than 30 | 65 |
| 11 | 30 but less than 35 | 60 |
| 12 | 35 but less than 50 | 55 |
| 13 | 50 or greater | 50 |
Charts with classes such as 77.5, 110 or 150 among their density bands are not this scale. Those classes are among the NMFC's 18, but they are not part of the standard density scale.
What else affects a density-based class?
- The item. A density table belongs to an NMFC item, so find the right item first, for example in ClassIT+ (NMFTA, How to determine freight classification and NMFC codes (updated 16 March 2026)).
- Handling units. On a multi-pallet shipment, density is calculated for each handling unit unless the shipping papers show only a total weight (NMFTA, How to classify a mixed-freight package, skid, or crate (updated 16 March 2026)).
- Packaging and pallet build. For many density-based items the class reflects the shipment as tendered, so product dimensions, packaging design and pallet configuration can raise or lower density (NMFTA density guide).
- Handling, stowability and liability. Items marked for these concerns carry classes assigned with them in mind, not density alone (NMFTA, NMFC Classification Glossary of Terms (updated 16 March 2026)).
How can you lower a density-based class?
By changing the shipment, not the paperwork: put the same weight into less space. NMFTA suggests looking for unused space in product, packaging and pallet configuration while still protecting the product, and checking when consolidating units improves the density of a handling unit (NMFTA density guide).
How do you avoid density-based reclassification?
Measure the unit the way the carrier will: outer dimensions with pallet and overhang included, weight as tendered. Since Supplement 2025-2 took effect on 6 December 2025, the carrier's right to verify covers dimensions as well as weight, and the bill of lading should show the item, sub and class (NMFTA, updates to Item 250100 in Supplement 2025-2 (updated 16 March 2026)). FreightSizer measures the handling unit with an iPhone or iPad LiDAR scanner, calculates density and determines the class in line with NMFTA guidelines, including the standards effective 19 July 2025. More on the measuring side in how to measure a pallet for LTL shipping and on the 2025 changes in what changed in the NMFC in 2025.
Frequently Asked Questions
What is the difference between density and freight class?
Density is a measurement in pounds per cubic foot. Freight class is the number the NMFC assigns for rating, from 50 to 500 (NMFTA glossary). For a density-based item, the density band decides the class.
What density gets the lowest class?
On the standard scale, 50 pounds per cubic foot or more is class 50 (Bulletin 1371), the lowest of the NMFC's 18 classes (NMFTA).
How often does the density scale change?
The NMFC is updated twice a year (NMFTA, Upcoming Key Dates for the NMFC Data Updates (updated 9 June 2026)). The standard density scale went from 11 to 13 subprovisions in Docket 2025-1, effective 19 July 2025, and NMFTA's FAQ updated in April 2026 still describes that scale (NMFTA FAQ).
Does a carrier have to use the NMFC?
The NMFC is a voluntary standard, but it is the standard for assigning class unless a carrier's own tariff provides otherwise (NMFTA FAQs).